Skip to content

About

PAROL6: open-source 3D-printed 6-axis desktop robot arm. BOM, STL and STEP files, firmware and build instructions.

Topics

Resources

Code of conduct

Contributing

Security policy

Stars

3.5k stars

Watchers

103 watching

Forks

PAROL6 desktop robot arm

PAROL6

Open-source 3D-printed 6-axis desktop robot arm.
Built like an industrial robot, in its mechanics, its control software and the way you use it.

Buy  ·   Documentation  ·   Build guide  ·   Download  ·   Discord

Release Hardware licence Firmware licence Discord

6 axes 408 mm 0.5 to 1 kg 0.1 mm 5.5 kg
stepper motors reach payload repeatability weight

Project overview

PAROL6 is a high-performance 3D-printed desktop robotic arm. The design approach of PAROL6 was to be similar to industrial robots in terms of mechanical design, control software, and usability. The control software, the GUI and the robot's STL files are open source.

▶︎  Watch PAROL6 in action
Watch PAROL6 in action on YouTube

Start here

I want to Go to
Buy a kit or a built robot source-robotics.com
Build my own BOM · print files · print table · building instructions · build guide
Set it up and make it move Quick start · control board firmware
Program it Commander software (tested PCs) · Waldo Commander (community) · Python API (legacy) · ROS 2 and MoveIt
Simulate it URDF and MuJoCo models
Add a gripper SSG-48 · MSG · pneumatic and vacuum
What is in this repository
Folder What is in it
STL every printed part, with the small print bed versions and the gripper holders
BOM the bill of materials, with a shop link and a reference image for every part
Building instructions the assembly manual (PDF) and its notes
Print table the print settings for each part
PAROL6 control board main software the control board firmware (PlatformIO)
PAROL6 control board test code the board's test firmware
parol6_description the URDF and MuJoCo models, from robot_descriptions
Extras Leap Motion hand control

The latest release has the print files, the BOM and the instructions as ready downloads.

Community

Ask in Discussions, chat on Discord, report a bug in Issues. See what others built in the community projects, and follow Source Robotics:

Discord Discussions YouTube Instagram X LinkedIn Hackaday Blog

Safety, liability and disclaimer

Warning

THIS PROJECT INVOLVES LETHAL VOLTAGES AND OTHER SERIOUS HAZARDS THAT CAN CAUSE SEVERE INJURY. YOU MUST READ THE FULL SAFETY WARNING AND DISCLAIMER DOCUMENT BEFORE USING ANY PROJECT FILES. BY PROCEEDING, YOU ACKNOWLEDGE AND ACCEPT ALL RISKS AND AGREE TO USE THIS PROJECT ENTIRELY AT YOUR OWN RESPONSIBILITY.

Licensing

The hardware, everything in this repository except the firmware, is under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0): the STL files, the BOM, the building instructions, the print table and the robot models. The firmware in PAROL6 control board main software and PAROL6 control board test code is under GPL-3.0, and the libraries in their lib folders keep their own licences. Until 4 November 2026 the whole repository was under GPL-3.0.

Versions

Which release and control board you have, and what works with it: VERSIONS.md.

About

PAROL6: open-source 3D-printed 6-axis desktop robot arm. BOM, STL and STEP files, firmware and build instructions.

Topics

Resources

Code of conduct

Contributing

Security policy

Stars

3.5k stars

Watchers

103 watching

Forks

Releases

Packages

Contributors

Languages