Open-source 3D-printed differential mechanism for a robot wrist.
Two gimbal motors on Spectral Micro BLDC drivers turn its printed bevel gears through timing belts.
BOM · Print files · Assembly pictures · Driver documentation · Discord
| 2 motors | 2 drivers | 11 parts | 2 belts |
|---|---|---|---|
| GBM5208-75 gimbal motors | Spectral Micro BLDC, on one CAN bus | to print, some of them twice | HTD 3M, 342 mm |
Due to the high demand to build this differential mechanism, we decided to open source it even at this early stage.
Note
This is a test fixture that we designed to test the mechanism for our future robots. The project is based on our motor driver, the Spectral Micro BLDC driver.
| I want to | Go to |
|---|---|
| 1. Get the parts | BOM · Spectral Micro drivers · CANvas USB to CAN adapter · magnets · cables: power, CAN, UART |
| 2. Print the parts | print files; some parts are printed twice |
| 3. Assemble it | the assembly pictures, in order (the assembly manual is still to do); the screws are in the BOM |
| 4. Calibrate the drivers | calibration, over the UART cable, before you attach the belts |
| 5. Program and test it | example code · Python library (guide) |
Important
Before you attach the belts, calibrate the motors: calibration spins each motor in both directions, with nothing on its shaft.
| Folder | What is in it |
|---|---|
BOM |
the bill of materials: the screws, the two motors, the bearings, the belts and the electronics, with shop links |
STLS |
the 11 printed parts: the bevel gears with their backplates and shaft, the pulley, the gear hub, the motor holder, the outer shell, the magnet shaft and a spacer |
Images |
the assembly pictures, img1 to img15, and the animation at the top of this page |
Example codes |
diferential_test.py, which turns the two motors in opposite directions over CAN and prints their speed, current and position |
Ask in Discussions, chat on Discord, report a bug in Issues, and follow Source Robotics:
- The software and hardware are still in development and may contain bugs, errors, or incomplete features.
- Users are encouraged to use this software and hardware responsibly and at their own risk.
Project is under the MIT License.
