Update vless.md

docs/config/inbound/listeners/vless.en.md

@@ -0,0 +1,103 @@
+# VLESS
+
+```{.yaml linenums="1"}
+listeners:
+- name: vless-in-1
+  type: vless
+  port: 10817 # supports ports format, e.g., 200,302 or 200,204,401-429,501-503
+  listen: 0.0.0.0
+  # routing-mark: 0 # set routing-mark for listening socket (Linux only)
+  # rule: sub-rule-name1 # uses rules by default; if sub-rule is not found, uses rules directly
+  # proxy: proxy # if not empty, directly hands over inbound traffic to the specified proxy (if proxy is not empty, the proxy name here must be valid, otherwise an error will occur)
+  users:
+    - username: 1
+      uuid: 9d0cb9d0-964f-4ef6-897d-6c6b3ccf9e68
+      flow: xtls-rprx-vision
+  # ws-path: "/" # if not empty, enables websocket transport layer
+  # grpc-service-name: "GunService" # if not empty, enables grpc transport layer
+  # xhttp-config: # If the field is not empty, enable the xhttp transport layer.
+  #   path: "/"
+  #   host: ""
+  #   mode: auto # Available: "stream-one", "stream-up" or "packet-up"
+  #   no-sse-header: false
+  #   x-padding-bytes: "100-1000"
+  #   x-padding-obfs-mode: false
+  #   x-padding-key: x_padding
+  #   x-padding-header: Referer
+  #   x-padding-placement: queryInHeader # Available: queryInHeader, cookie, header, query
+  #   x-padding-method: repeat-x # Available: repeat-x, tokenish
+  #   uplink-http-method: POST # Available: POST, PUT, PATCH, DELETE
+  #   session-placement: path # Available: path, query, cookie, header
+  #   session-key: ""
+  #   session-table: "" # Available: "", "uuid", "ALPHABET", "Alphabet", "BASE36", "Base62", "HEX", "alphabet", "base36", "hex", "number"
+  #   session-length: "16-32" # the initial value cannot be 0, and the total ID space must be greater than 2.1 billion; takes effect only if session-table is not empty or uuid
+  #   seq-placement: path # Available: path, query, cookie, header
+  #   seq-key: ""
+  #   uplink-data-placement: body # Available: body, cookie, header
+  #   uplink-data-key: ""
+  #   uplink-chunk-size: 0 # only applicable when uplink-data-placement is not body
+  #   sc-max-buffered-posts: 30
+  #   sc-stream-up-server-secs: "20-80"
+  #   sc-max-each-post-bytes: 1000000
+  # -------------------------
+  # Configuration of server-side vless encryption:
+  # (native mode / public key XOR only / fully random. 1-RTT generates a random ticket valid for 300-600 seconds each time for 0-RTT reuse / only 1-RTT is allowed)
+  # Filling in "600s" will randomly take between 50% and 100%, which is equivalent to filling in "300-600s"
+  # / means selecting only one option, followed by base64 - at least one, infinite chain, use `mihomo generate vless-x25519` and `mihomo generate vless-mlkem768` to generate, remove parentheses when replacing values
+  #
+  # Padding is an optional parameter, taking effect only on 1-RTT to eliminate handshake length characteristics, default value on both sides is "100-111-1111.75-0-111.50-0-3333":
+  # After 1-RTT client/server hello, a random padding of 111 to 1111 bytes is added with 100% probability
+  # With 75% probability, a random delay of 0 to 111 milliseconds is applied ("probability-from-to")
+  # Again with 50% probability, a random padding of 0 to 3333 bytes is sent (if 0, Write() is not called)
+  # Server and client can set different padding parameters, infinite chain in the order of len, gap, the first padding requires 100% probability, minimum 35 bytes
+  # -------------------------
+  # decryption: "mlkem768x25519plus.native/xorpub/random.600s(300-600s)/0s.(padding len).(padding gap).(X25519 PrivateKey).(ML-KEM-768 Seed)..."
+  # if the following two options are filled, enables tls (must be filled together)
+  # certificate: ./server.crt # certificate in PEM format, or the path to the certificate
+  # private-key: ./server.key # corresponding private key in PEM format, or the path to the private key
+  # the following two options are for mTLS configuration. If client-auth-type is set to "verify-if-given" or "require-and-verify", client-auth-cert must not be empty
+  # client-auth-type: "" # available values: "", "request", "require-any", "verify-if-given", "require-and-verify"
+  # client-auth-cert: string # certificate in PEM format, or the path to the certificate
+  # if filled, enables ECH (can be generated by `mihomo generate ech-keypair <plaintext-domain>`)
+  # ech-key: |
+  #   -----BEGIN ECH KEYS-----
+  #   ACATwY30o/RKgD6hgeQxwrSiApLaCgU+HKh7B6SUrAHaDwBD/g0APwAAIAAgHjzK
+  #   madSJjYQIf9o1N5GXjkW4DEEeb17qMxHdwMdNnwADAABAAEAAQACAAEAAwAIdGVz
+  #   dC5jb20AAA==
+  #   -----END ECH KEYS-----
+  # if reality-config is filled, enables reality (note: cannot be filled simultaneously with certificate and private-key)
+  reality-config:
+    dest: test.com:443
+    private-key: jNXHt1yRo0vDuchQlIP6Z0ZvjT3KtzVI-T4E7RoLJS0 # can be generated by `mihomo generate reality-keypair` command
+    short-id:
+      - 0123456789abcdef
+    server-names:
+      - test.com
+    # the following two limits are optional, used to rate-limit fallback connections that fail verification, bytesPerSec defaults to 0 which means disabled
+    # fallback rate limiting is a fingerprint feature and is not recommended; if you are a panel/one-click script developer, make sure to randomize these parameters
+    limit-fallback-upload:
+      after-bytes: 0 # starts rate limiting after transmitting specified bytes
+      bytes-per-sec: 0 # baseline speed (bytes/second)
+      burst-bytes-per-sec: 0 # burst speed (bytes/second), takes effect when greater than bytesPerSec
+    limit-fallback-download:
+      after-bytes: 0 # starts rate limiting after transmitting specified bytes
+      bytes-per-sec: 0 # baseline speed (bytes/second)
+      burst-bytes-per-sec: 0 # burst speed (bytes/second), takes effect when greater than bytesPerSec
+  # shadow-tls:
+  #   enable: true
+  #   version: 3 # supports v1/v2/v3
+  #   # password: shadow-tls-password # v2 configuration item
+  #   users: # v3 configuration item
+  #     - name: shadow-tls-user
+  #       password: shadow-tls-password
+  #   handshake:
+  #     dest: [www.example.com:443](https://www.example.com:443)
+  #     # proxy: ""
+    ### NOTE: For vless listener, if "allow-insecure" is not true, at least one of "certificate and private-key" or "shadow-tls" or "jls-config" or "reality-config" or "decryption" must be filled in ###
+  # allow-insecure: false # whether to allow disabling TLS encryption (NOTE: only used when upstreamed by nginx, caddy, etc.)
+  # mux-option:
+  #   padding: true
+  #   brutal:
+  #     enabled: true
+  #     up: 1000 # default Mbps
+  #     down: 1000

docs/config/inbound/listeners/vless.md

@@ -83,7 +83,17 @@ listeners:
       after-bytes: 0 # 传输指定字节后开始限速
       bytes-per-sec: 0 # 基准速率（字节/秒）
       burst-bytes-per-sec: 0 # 突发速率（字节/秒），大于 bytesPerSec 时生效
-  ### 注意，对于vless listener, 如果 "allow-insecure" 不为 true, 至少需要填写 “certificate和private-key” 或 “reality-config” 或 “decryption” 的其中一项 ###
+  # shadow-tls:
+  #   enable: true
+  #   version: 3 # 支持 v1/v2/v3
+  #   # password: shadow-tls-password # v2 配置项
+  #   users: # v3 配置项
+  #     - name: shadow-tls-user
+  #       password: shadow-tls-password
+  #   handshake:
+  #     dest: www.example.com:443
+  #     # proxy: ""
+    ### 注意，对于vless listener, 如果 "allow-insecure" 不为 true, 至少需要填写 “certificate和private-key” 或 “shadow-tls” 或 “jls-config” 或 “reality-config” 或 “decryption” 的其中一项 ###
   # allow-insecure: false # 是否允许不开启tls加密（注意：仅用于有 nginx, caddy 前置的情况）
   # mux-option:
   #   padding: true

docs/config/inbound/listeners/vless.ru.md

@@ -83,7 +83,17 @@ listeners:
       after-bytes: 0 # начать ограничение скорости после передачи указанного количества байт
       bytes-per-sec: 0 # базовая скорость (байт/сек)
       burst-bytes-per-sec: 0 # пиковая скорость (байт/сек), действует когда больше bytesPerSec
-  ### Обратите внимание, что для слушателей Vless, если параметр "allow-insecure" не равен true, необходимо заполнить хотя бы одно из следующих полей: "certificate and private-key", "reality-config" или "decryption". ###
+  # shadow-tls:
+  #   enable: true
+  #   version: 3 # поддерживает v1/v2/v3
+  #   # password: shadow-tls-password # параметр конфигурации v2
+  #   users: # параметр конфигурации v3
+  #     - name: shadow-tls-user
+  #       password: shadow-tls-password
+  #   handshake:
+  #     dest: www.example.com:443
+  #     # proxy: ""
+    ### ВНИМАНИЕ: Для слушателя vless, если "allow-insecure" не равен true, необходимо заполнить как минимум одну из опций: «certificate и private-key» или «shadow-tls» или «jls-config» или «reality-config» или «decryption» ###
   # allow-insecure: false # Разрешить ли отключение шифрования TLS (Примечание: только в случаях, когда nginx или caddy установлены предварительно)
   # mux-option:
   #   padding: true