Enable Stealth swap and send via param, deep link, and saved toggles

CHANGELOG.md

@@ -28,6 +28,8 @@
 - added: MoonPay Trade swap provider
 - added: Per-provider swap asset disables from the info server
 - added: Copy button for the master private key or seed, cleared from the clipboard after one minute
+- added: `stealth` navigation param that presets the Stealth Swap and Stealth Send toggles
+- added: `edge://send` deep link that opens Send, optionally with Stealth Send on
 - changed: Re-enable Pirate Chain on Android, using the smaller binary that downloads its Sapling parameters
 - changed: Standardize wallet list automation test IDs to use period separators.
 - changed: Lock the send confirmation slider for the rest of the scene once a broadcast has been attempted, whether the broadcast reported success or failure, and replace the generic failure card with a message that the transaction may have gone through, pointing at the block explorer or confirmation email before trying again.
@@ -39,6 +41,8 @@
 - changed: Replace the flat `ENV` singleton with separate `CONFIG`, `KEYS`/`globalKeys`, and `pluginMaps` accessors (no top-level globalKeys flatten)
 - changed: WalletConnect Smart Contract Call warning restated in the solid UI4 card
 - changed: WalletConnect Connect button pinned to the bottom of Confirm Connection
+- changed: Stealth Swap toggle shows on the swap scene before assets are selected
+- changed: Stealth Send and Stealth Swap toggles remember the last setting per account
 - fixed: Paybis and Simplex going missing from buy and sell on the launch after a slow or retried device attestation
 - fixed: Missing wrong-device-clock warning on a launch that runs no device attestation
 - fixed: Missing exchange rates when the device clock is set ahead

maestro/14-stealth/README.md

@@ -113,11 +113,19 @@ private quote on a pair the suite does not cover is five `runFlow` steps:
       AMOUNT: '30'
 - runFlow:
     file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'on'
 - runFlow:
     file: ../common/stealth-await-quote.yaml
 ```
 
-Two things bite when writing these by hand:
+Three things bite when writing these by hand:
+
+- **The Stealth toggles are remembered per account** (synced settings), so a
+  scene can open with Stealth already on from an earlier run or another
+  device. `stealth-toggle.yaml` takes `STATE: on|off` and taps only when the
+  card is in the other state, so call it with an explicit state rather than
+  assuming the scene opens off.
 
 - **The confirm slider is a pan gesture.** A coordinate swipe across the track
   does nothing at all. `stealth-slide-to-confirm.yaml` swipes from the thumb by

maestro/14-stealth/stealth-below-private-minimum.yaml

@@ -24,6 +24,11 @@ tags:
     env:
       WALLET: ${SRC_WALLET}
       WALLET_CODE: ${SRC_CODE}
+# The toggle is remembered per account; this walk needs it off.
+- runFlow:
+    file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'off'
 - runFlow:
     file: ../common/stealth-pick-myself.yaml
     env:
@@ -37,7 +42,10 @@ tags:
 - runFlow:
     file: ../common/stealth-await-quote.yaml
 
+# Asking for on taps, since the explainer is hidden, and the tap is refused.
 - runFlow:
     file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'on'
 - assertVisible: 'Private routing needs at least.*'
 - takeScreenshot: maestro/screenshots/stealth-below-min-01-toggle-refused

maestro/14-stealth/stealth-cross-asset-quote.yaml

@@ -21,6 +21,11 @@ tags:
     env:
       WALLET: ${SRC_WALLET}
       WALLET_CODE: ${SRC_CODE}
+# The toggle is remembered per account; this walk needs it off.
+- runFlow:
+    file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'off'
 - runFlow:
     file: ../common/stealth-pick-myself.yaml
     env:

maestro/14-stealth/stealth-execute-send.yaml

@@ -37,6 +37,8 @@ tags:
       AMOUNT: ${AMOUNT}
 - runFlow:
     file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'on'
 - runFlow:
     file: ../common/stealth-await-quote.yaml
     env:

maestro/14-stealth/stealth-execute-swap.yaml

@@ -60,6 +60,7 @@ tags:
     file: ../common/stealth-toggle.yaml
     env:
       TOGGLE: 'Stealth Swap'
+      STATE: 'on'
 - tapOn:
     text: 'Tap to edit'
     index: 0

maestro/14-stealth/stealth-myself-picker.yaml

@@ -20,6 +20,11 @@ tags:
     env:
       WALLET: ${SRC_WALLET}
       WALLET_CODE: ${SRC_CODE}
+# The toggle is remembered per account; this walk needs it off.
+- runFlow:
+    file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'off'
 - tapOn:
     id: 'addressTileMyself'
 - waitForAnimationToEnd:

maestro/14-stealth/stealth-private-quote.yaml

@@ -25,6 +25,11 @@ tags:
     env:
       WALLET: ${SRC_WALLET}
       WALLET_CODE: ${SRC_CODE}
+# The toggle is remembered per account; this walk needs it off.
+- runFlow:
+    file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'off'
 - runFlow:
     file: ../common/stealth-pick-myself.yaml
     env:
@@ -40,6 +45,8 @@ tags:
 
 - runFlow:
     file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'on'
 - takeScreenshot: maestro/screenshots/stealth-private-01-requoting
 - runFlow:
     file: ../common/stealth-await-quote.yaml

maestro/14-stealth/stealth-qr-payment-uri.yaml

@@ -22,6 +22,11 @@ tags:
     env:
       WALLET: ${SRC_WALLET}
       WALLET_CODE: ${SRC_CODE}
+# The toggle is remembered per account; this walk needs it off.
+- runFlow:
+    file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'off'
 
 # Cross-asset destination: the source wallet cannot parse this chain's URI.
 - runFlow:

maestro/14-stealth/stealth-send.yaml

@@ -22,17 +22,26 @@ tags:
       WALLET_CODE: ${SRC_CODE}
 
 # Plain same-asset start: the recipient selector is available before an address.
+# The toggle is remembered per account, so it is forced off first.
+- runFlow:
+    file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'off'
 - assertVisible: 'Stealth Send'
 - assertVisible: 'Recipient receives'
 - takeScreenshot: maestro/screenshots/stealth-send-01-initial
 
 # Stealth on: the toggle card expands with the explainer and Learn more link.
 - runFlow:
     file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'on'
 - assertVisible: 'Uses a route that helps obfuscate.*Learn more.*'
 - takeScreenshot: maestro/screenshots/stealth-send-02-stealth-on
 - runFlow:
     file: ../common/stealth-toggle.yaml
+    env:
+      STATE: 'off'
 
 # A memo-required destination chain adds its tag row.
 - runFlow:

maestro/14-stealth/stealth-swap.yaml

@@ -15,12 +15,19 @@ tags:
     env:
       WALLET: ${SRC_WALLET}
       WALLET_CODE: ${SRC_CODE}
+# The toggle is remembered per account, so it is forced off for the start.
+- runFlow:
+    file: ../common/stealth-toggle.yaml
+    env:
+      TOGGLE: 'Stealth Swap'
+      STATE: 'off'
 - assertVisible: 'Stealth Swap'
 - takeScreenshot: maestro/screenshots/stealth-swap-01-start
 
 - runFlow:
     file: ../common/stealth-toggle.yaml
     env:
       TOGGLE: 'Stealth Swap'
+      STATE: 'on'
 - assertVisible: 'Routes your swap through multiple.*Learn more.*'
 - takeScreenshot: maestro/screenshots/stealth-swap-02-stealth-on

maestro/common/stealth-toggle.yaml

@@ -1,23 +1,35 @@
-# Flips the Stealth toggle.
+# Sets the Stealth toggle to a requested state.
 #
 # env TOGGLE  "Stealth Send" on the Send scene, "Stealth Swap" on the Exchange
 #             scene. Defaults to the Send scene's label.
+# env STATE   "on" or "off". Defaults to "on".
+#
+# The toggles are remembered per account, so a scene can open with Stealth
+# already on from an earlier run. The helper reads the current state from the
+# explainer text the card shows only while armed, and taps only when that state
+# differs from STATE. A tap the scene refuses (below the private floor, an
+# asset with no private route) leaves the explainer hidden and shows the reason
+# instead, which callers can assert.
 #
 # Toggling always invalidates any held quote and refetches, because the private
 # and transparent routes are different requests, so callers that need a live
 # quote afterwards should follow with stealth-await-quote.yaml.
 appId: ${APP_ID}
 env:
   APP_ID: ${MAESTRO_APP_ID || 'co.edgesecure.app'}
-  # Declared under a different name than the one callers pass: a subflow env
+  # Declared under different names than the ones callers pass: a subflow env
   # entry that reuses the caller's key overwrites what the caller passed, so
   # `TOGGLE: ${TOGGLE || default}` would silently ignore the argument.
   TOGGLE_LABEL: ${TOGGLE || 'Stealth Send'}
+  TARGET: ${STATE || 'on'}
+  # The explainer text each card shows only while armed:
+  INFO: "${(TOGGLE || 'Stealth Send') == 'Stealth Swap' ? 'Routes your swap through multiple.*' : 'Uses a route that helps obfuscate.*'}"
 ---
 # Rows can sit above or below the fold depending on where the previous step
 # left the scroll position, so the row is brought into view from either side
-# before it is tapped. A `scrollUntilVisible` that is already satisfied is a
-# no-op, and one that scrolls the wrong way is optional and warns.
+# before it is read. A `scrollUntilVisible` that is already satisfied is a
+# no-op, and one that scrolls the wrong way is optional and warns. Centering
+# the row also brings the explainer below it into view.
 - scrollUntilVisible:
     element:
       text: '${TOGGLE_LABEL}'
@@ -32,6 +44,19 @@ env:
     timeout: 4000
     centerElement: true
     optional: true
-- tapOn: '${TOGGLE_LABEL}'
-- waitForAnimationToEnd:
-    timeout: 2500
+- runFlow:
+    when:
+      notVisible: '${INFO}'
+      true: ${TARGET == 'on'}
+    commands:
+      - tapOn: '${TOGGLE_LABEL}'
+      - waitForAnimationToEnd:
+          timeout: 2500
+- runFlow:
+    when:
+      visible: '${INFO}'
+      true: ${TARGET == 'off'}
+    commands:
+      - tapOn: '${TOGGLE_LABEL}'
+      - waitForAnimationToEnd:
+          timeout: 2500

src/__tests__/DeepLink.test.ts

@@ -544,6 +544,45 @@ describe('parseDeepLink', function () {
     })
   })
 
+  describe('send', () => {
+    makeLinkTests({
+      'edge://send?stealth=true': {
+        type: 'send',
+        asset: undefined,
+        stealth: true
+      },
+      'edge://send?stealth=true&asset=bitcoin': {
+        type: 'send',
+        asset: { pluginId: 'bitcoin', tokenId: null },
+        stealth: true
+      },
+      'https://deep.edge.app/send?asset=ethereum_0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48&stealth=true':
+        {
+          type: 'send',
+          asset: {
+            pluginId: 'ethereum',
+            tokenId: 'a0b86991c6218b36c1d19d4a2e9eb0ce3606eb48'
+          },
+          stealth: true
+        },
+      'edge://send': {
+        type: 'send',
+        asset: undefined,
+        stealth: false
+      },
+      'edge://send?stealth=1&asset=monero': {
+        type: 'send',
+        asset: { pluginId: 'monero', tokenId: null },
+        stealth: false
+      },
+      'edge://send?stealth=true&asset=ethereum_': {
+        type: 'send',
+        asset: undefined,
+        stealth: true
+      }
+    })
+  })
+
   describe('swap', () => {
     makeLinkTests({
       'edge://swap': {
@@ -876,6 +915,7 @@ describe('getDeepLinkReadiness', function () {
       'wallets'
     ],
     [{ type: 'rewards', pluginId: 'bitcoin', tokenId: null }, 'wallets'],
+    [{ type: 'send', stealth: true }, 'wallets'],
     [{ type: 'walletConnect', uri: 'wc:topic@2' }, 'wallets'],
 
     // An `exchange` link that names an asset opens the wallet picker, so it