Overview · Key Features · Specifications (Chassis · Drive · Power · Electronics) · Weapon · Design & Engineering · Assembly · Testing · Maintenance · BOM · Battle Record · Competition Notes · Roadmap · Build Files · Safety · Credits · License
A compact, belt-driven 3 lb combat robot engineered for durability, ease of maintenance, and consistent performance in high-impact matches. RONIN pairs a high-energy horizontal spinner with a reinforced front wedge: robust drive power, efficient energy distribution, and a pointed front end built for pushing, deflecting, and controlling opponents.
Built for the 3 lb (1.36 kg) beetleweight class, RONIN v1 is designed to be serviceable between matches — a modular two-piece frame with clean wiring and a lightweight multi-material build (printed PETG / TPU 95A frame with a 7075-T6 aluminum spinner bar) that keeps repair times short and combat performance consistent. This document covers RONIN v1, the first competition iteration; planned improvements are tracked in the upgrade roadmap below.
Debut result: 2nd place at MRC 2026 — two knockout wins en route to the podium in the 3 lb knockout bracket.
- Horizontal spinner weapon — 7075-T6 bar, brushless motor + 80 A ESC
- Reinforced front wedge — aggressive pushing, deflection, and positional control
- Belt-driven dual-wheel drivetrain — smooth, high-traction torque delivery
- Modular 2-piece chassis — fast repairs between matches
- Shock-resistant electronics mounting — foam-damped ESCs and secure routing
- Clean internal wiring — reliable and quick to troubleshoot
- Competition-ready layout — compatible with most 3 lb rule sets
| Item | Specification |
|---|---|
| Material | PETG + TPU 95A (3D printed) |
| Manufacturing | Bambu Lab A1 Mini (FDM) |
| Architecture | 2-piece modular frame |
| Fasteners | M3 / M4 stainless steel |
| Dimensions | 220 × 160 × 91 mm (8.7 × 6.3 × 3.6 in) |
| Weight | 1150 g (2.54 lb) (3.0 lb / 1.36 kg max) |
| Item | Specification |
|---|---|
| Drive type | Belt-driven dual-wheel |
| Motor | 2× DartBox V2 Drive gearmotors (VIPER model) |
| Drive ESC | WEKA 20A Dual Brushed Motor Controller |
| Mainboard | Just 'Cuz Motherboard V4 (Just 'Cuz Robotics) |
| Receiver | FS2A — AFHDS-2A protocol |
| Wheels | 43 mm (1.7 in) rubber / foam (Silicon_Wheels) |
| Belts | S3M timing belts (74 teeth · 4 mm) |
| Top speed | ~3.5 m/s (12.6 km/h · 7.8 mph) theoretical · ~2.6 m/s (9.4 km/h) realistic |
| Item | Specification |
|---|---|
| Battery | Tattu 3S LiPo · 11.1 V · 450 mAh · 75C |
| Connectors | XT30 |
| Power distribution | DartPCB (Just 'Cuz) |
| Safety | External power switch + removable link |
| Item | Specification |
|---|---|
| Type | Horizontal spinner (bar) |
| Weapon bar | 7075-T6 aluminum |
| Motor | D3536 brushless · 1450 kV (current) |
| ESC | 80 A brushless (current) |
| Upgrade | D3536 · 1200 kV + 40 A ESC (planned) |
| Item | Specification |
|---|---|
| Mainboard | Just 'Cuz Motherboard V4 (Just 'Cuz Robotics) |
| Drive ESC | WEKA 20A Dual Brushed Motor Controller |
| Weapon ESC | 80 A brushless |
| Receiver | FS2A — AFHDS-2A protocol |
| Voltage regulation | 5 V BEC for receiver |
| Telemetry | LED status indicator |
| Transmitter | FlySky FS-i6 — AFHDS-2A |
RONIN is a horizontal spinner with a control-game edge. The 7075-T6 bar delivers high-energy impacts that batter wedges, wheel mounts, and armor, while the reinforced front wedge lets RONIN push and control opponents when the weapon is spooled down. That philosophy drives three decisions:
- Energy + control — a high-energy weapon bar backed by a strong, belt-driven drivetrain that can out-push and out-position most opponents
- Serviceability — everything that commonly breaks (belts, wheels, weapon bar, drive ESC) is reachable within minutes between fights
- Efficient weight budget — the weapon, chassis, and drive get the weight; the electronics bay stays tight and clean
Two DartBox V2 Drive gearmotors (VIPER model, 22 mm) turn both wheels through S3M timing belts, powered by the WEKA 20A Dual Brushed Motor Controller and managed by the Just 'Cuz Motherboard V4 mainboard. The DartBox V2 motors are lightweight and ultra-powerful for their size, giving RONIN a strong power-to-weight ratio. Belt drive reduces shock loading on the motors and drivetrain during impacts — a key reliability win over direct chain-drive setups — while the WEKA dual ESC delivers smooth, high-traction torque for pushing matches.
Top-speed estimate: Based on the DartBox V2 Drive output (1550 RPM @ 3S) and 43 mm wheels, RONIN reaches ~3.5 m/s (12.6 km/h · 7.8 mph) theoretical no-load top speed. Accounting for battery sag, friction, and belt losses, a realistic figure is ~2.6 m/s (9.4 km/h · 5.9 mph).
| Drivetrain | Electronics |
|---|---|
| 2× DartBox V2 Drive (VIPER) + S3M belts | WEKA 20A dual ESC · JCMB V4 · FS2A |
RONIN's primary weapon is a horizontal spinner bar machined from 7075-T6 aluminum, spinning around a horizontal axis and powered by a D3536 brushless motor (1450 kV) with an 80 A ESC. The bar delivers high-energy impacts that batter wedges, wheel mounts, and unprotected chassis.
A reinforced front wedge — a low-sweep, angled blade — tucks under opponents for pushing and positional control when the weapon is down. Wedge geometry is optimized for steel arena floors, and is re-torqued at every event to keep engagement angle consistent.
| Weapon config | Bar | Motor | ESC |
|---|---|---|---|
| Current | 7075-T6 | D3536 · 1450 kV | 80 A |
| Planned | 7075-T6 | D3536 · 1200 kV | 40 A |
Upgrade path: The planned D3536 · 1200 kV / 40 A combination lightens the weapon sub-assembly and improves efficiency — trading a little top-end weapon speed for a smaller, simpler drive package.
RONIN's modular frame is 3D printed on a Bambu Lab A1 Mini in PETG for structural rigidity, with TPU 95A parts where flexibility and shock absorption matter. This multi-material approach keeps the robot lightweight, reduces part count, and makes it fast to reprint spare parts between events.
- Install the front wedge using M4 bolts.
- Mount side panels and check alignment.
- Add the top plate last for easy internal access.
- Mount the drive motors securely; apply thread-locker.
- Align pulleys and tension the S3M belts.
- Install wheels and verify free rotation.
- Mount ESCs with foam tape for shock absorption.
- Route motor wires cleanly along chassis walls.
- Keep the receiver away from high-current lines.
- Connect: battery → PD board → ESCs → motors.
- Verify belt tension
- Confirm correct motor direction
- Test radio failsafe
- Inspect all fasteners
- No-load spin-up — confirm smooth motor ramp with wheels off the ground.
- Steering response — check left/right trim center and full-lock turns.
- Wedge engagement — test on a flat surface; wedge should lift, not bounce.
- Thermal soak — 1–2 minute drive test to confirm ESC and motor temperatures stay within limits.
- Inspect belts after every match — replace at the first sign of fraying
- Re-tighten all screws, especially the wedge bolts
- Check motor bearings for debris and re-grease as needed
- Replace wheels when worn to maintain consistent traction
- Battery care — keep Tattu 3S LiPos balanced and store them safely (450 mAh nominal)
📎 CAD files (STEP) for every machined and printed part are in Build Files.
| Component | Specification | Source / Link |
|---|---|---|
| Drive motor | 2× DartBox V2 Drive · VIPER 22 mm | 🔗 DartBox Drive |
| Weapon motor | D3536 brushless · 1450 kV (current) | 🛒 AliExpress |
| Weapon ESC | 80 A brushless (current) | 🛒 AliExpress |
| Drive ESC | WEKA 20A Dual Brushed Motor Controller | 🔗 WEKA 20A |
| Mainboard | Just 'Cuz Motherboard V4 | 🔗 Motherboard V4 |
| Power dist. | DartPCB (Just 'Cuz) | 🔗 DartPCB |
| Receiver | FS2A (AFHDS-2A protocol) | 🛒 AliExpress |
| Battery | Tattu 3S LiPo · 450 mAh · 75C | 🛒 AliExpress |
| Wheels | 43 mm rubber / foam | 🔗 Silicon_Wheels |
| Belts | S3M timing belt · 74 teeth · 4 mm | 🔗 S3M 74T Belt |
| Weapon pulley | S3M pulley · 3M-222 · 10 mm width | 🛒 AliExpress |
| Weapon bar | 7075-T6 aluminum (horizontal spinner) | 🔗 CNC (JLC) |
| Weapon shaft | M8 × 160 mm (1 pc) | 🛒 AliExpress |
| Weapon nut | M8 nut (for weapon shaft) | 🛒 AliExpress |
| Chassis | PETG + TPU 95A (Bambu Lab A1 Mini print) | 🔗 Print settings |
| Connectors | XT30 | 🛒 AliExpress |
| Transmitter | FlySky FS-i6 (AFHDS-2A) | 🛒 AliExpress |
| Fasteners | M3 screw kit · 304 SS · brass thread inserts (M3 × 10 mm) | 🛒 M3 Kit · 🛒 M3 304 SS · 🛒 Brass Inserts |
Sources: Live links from (AliExpress) and (Just Cuz Robotics).
| Date | Event | Opponent | Result | Notes |
|---|---|---|---|---|
| 2026-04-05 | MRC (Minoan Robot Sports) | Instudies | Win | KO |
| 2026-04-05 | MRC (Minoan Robot Sports) | 404 NOT FOUND | Win | KO |
| 2026-04-05 | MRC (Minoan Robot Sports) | BigHero 1 | Loss | Battery exploded |
Record: 2–1 — two wins (by KO) and one loss at the same MRC event.
| Event | Date | Placement |
|---|---|---|
| MRC (Minoan Robot Sports) — 3 lb knockout bracket | 2026-04-05 | 2nd Place |
RONIN fought through the MRC knockout bracket to a 2nd-place finish — dropping only the semifinal-style bout against BigHero 1 (battery failure) after two KO wins earlier in the day.
- Designed for the 3 lb (1.36 kg) beetleweight class
- Complies with standard safety rules: removable link and LiPo protection
- Wedge geometry optimized for steel arena floors
- Drive tuned for high-traction pushing matches
Completed in v1 (this build):
- Horizontal spinner weapon — 7075-T6 bar + D3536 (1450 kV) + 80 A ESC
- Belt-driven dual-wheel drivetrain
- Brushed drive + WEKA 20A dual ESC (JCMB V4 / FS2A)
Planned for v2:
- Weapon upgrade — D3536 · 1200 kV + 40 A ESC (lighter, more efficient)
- Hardened AR500 steel wedge — more bite and durability
- Gyro-assisted driving — stability under self-righting hits
- Quick-swap battery bay — faster pit stops
All CAD is provided as STEP files (universal — open in Fusion 360, SolidWorks, Onshape, FreeCAD…), plus the complete robot as a native Fusion 360 archive (.f3z).
| File | Description | Size |
|---|---|---|
ronin_V1.f3z |
Complete robot — native Fusion 360 archive (all sketches, bodies & joints) | ~20 MB |
ronin_V1.step |
Complete robot — universal STEP assembly | ~15 MB |
| Part | File |
|---|---|
| Horizontal spinner bar | Horizontal_Spinner.step |
| Fork | Fork.step |
| Part | File |
|---|---|
| Base plate | Base_Plate.step |
| Front plate | Front_Plate.step |
| Back plate | Back_Plate.step |
| Big top plate | Big_Top.step |
| Small top plate | Small_Top.step |
| Left inside wing | Left_Inside_Wing.step |
| Right inside wing | Right_Inside_Wing.step |
| Motor mount (variant 1) | Motor_Mount_1.step |
| Motor mount (variant 2) | Motor_Mount_2.step |
| Shaft spacer | Shaft_Spacer.step |
| Part | File |
|---|---|
| Big weapon pulley | Big_Weapon_Pulley.step |
| Small weapon pulley | Small_Weapon_Pulley.step |
| Left outer wing | Left_Outer_Wing.step |
| Right outer wing | Right_Outer_Wing.step |
Wheels — Ronin_V1/Parts/Wheels/ (cast silicone tires · Silicon_Wheels project)
| Part | File |
|---|---|
| Front wheel | Front_Wheel.step |
| Rear wheel | Rear_Wheel.step |
Wheel hub and casting files (including the
Combat_Robot_Silicon_Mold.stl) live in the companion Silicon_Wheels repo, along with print settings and the full casting procedure.
- Removable link — power can be broken instantly from outside the arena
- Hard-cased / secured LiPo — battery strapped or pocketed securely
- E-stop — external power switch for immediate power-down
- Always verify against the current SPARC / NHRL / event ruleset before competing.
RONIN was designed, built, and driven by Anastasis Karaivazoglou as part of the IRONBRICK | Fibran team.
Special thanks to our sponsors Fibran and JLC for their support of the build.
All rights reserved. © [2026] Anastasis Karaivazoglou / IRONBRICK | Fibran.
This project is provided for reference and personal use only. No part of the design, documentation, or media may be reproduced, distributed, or used in commercial or competitive projects without prior written permission. Sponsors: Fibran and JLC.
README maintained with the RONIN build. Last updated: September 2026.

