config.toml

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.

# Root directory for server data. Environment override: IGGY_PATH.
path = "local_data"

# Consumer group rebalancing and session reports. [heartbeat] sets the session timeout.
[consumer_group]
# Maximum time a partition can remain in pending revocation before being force-transferred to the target member.
rebalancing_timeout = "30s"
# Server-to-server session reports run even when client heartbeat checks are disabled.
# Must be nonzero. Use the same settings on all nodes.
heartbeat_interval = "5s"

[data_maintenance.messages]
# Enables or disables the segment cleaner. It deletes the oldest sealed segments of
# topics with a finite message_expiry or max_topic_size, per partition, best-effort.
cleaner_enabled = true

# Interval for running the message cleaner.
interval = "1 m"

# HTTP server configuration
[http]
# Determines if the HTTP server is active.
# `true` enables the server, allowing it to handle HTTP requests.
# `false` disables the server, preventing it from handling HTTP requests.
# In cluster mode, followers forward control-plane requests (streams, topics,
# users, ...) to the current primary when a cluster-wide JWT key exists (see
# http.jwt / cluster.auth below).
# TODO: forwarding does not cover the partition-plane APIs yet - message
# produce and consumer-offset writes are never forwarded and must reach the
# partition's primary node directly (message polls read locally on any node).
enabled = true

# Specifies the network address and port for the HTTP server.
# The format is "HOST:PORT". For example, "127.0.0.1:3000" listens on localhost only on port 3000.
# In cluster mode the HOST still picks the bind interface, while the port
# comes from this node's cluster.nodes ports.http entry.
address = "127.0.0.1:3000"

# Maximum size of the request body in bytes. For security reasons, the default limit is 2 MB.
# HTTP produce requests are not framed by the message bus, so this body cap is
# what bounds the widest batch record the HTTP path can persist. Boot refuses a
# value above the frozen 256 MiB recovery ceiling (see
# message_bus.max_message_size), and a body above message_bus.max_message_size
# can still admit a batch that no peer accepts a replication frame for -- keep
# this at or below that cap unless replica_count = 1.
max_request_size = "2 MB"

# Enables the embedded Web UI dashboard at '/ui'.
# When set to `true` and the server is compiled with the 'iggy-web' feature,
# the Svelte dashboard will be served at the '/ui' endpoint, providing a
# browser-based interface for managing streams, topics, and viewing messages.
# If the server is compiled without 'iggy-web' feature and this is set to `true`,
# a warning will be logged at startup but the server will continue to run.
# `true` enables the embedded Web UI (requires server built with 'iggy-web' feature).
# `false` disables the embedded Web UI (default).
web_ui = false

# Configuration for Cross-Origin Resource Sharing (CORS).
[http.cors]
# Controls whether CORS is enabled for the HTTP server.
# `true` allows handling cross-origin requests with specified rules.
# `false` blocks cross-origin requests, enhancing security.
enabled = true

# Specifies which HTTP methods are allowed when CORS is enabled.
# For example, ["GET", "POST"] would allow only GET and POST requests.
allowed_methods = ["GET", "POST", "PUT", "DELETE"]

# Defines which origins are permitted to make cross-origin requests.
# An asterisk "*" as the first entry allows all origins (any entries after it
# are ignored); "*" in any other position fails the config. Specific domains
# can be listed to restrict access.
allowed_origins = ["*"]

# Lists allowed headers that can be used in CORS requests.
# For example, ["content-type"] permits only the content-type header.
allowed_headers = ["content-type", "authorization"]

# Headers that browsers are allowed to access in CORS responses.
# `iggy-view` carries the current VSR view number; exposing it lets browser
# clients read it on cross-origin responses.
exposed_headers = ["iggy-view"]

# Determines if credentials like cookies or HTTP auth can be included in CORS requests.
# `true` allows credentials to be included, useful for authenticated sessions;
# it requires explicit (non-wildcard) allowed_origins, allowed_headers, and
# exposed_headers.
# `false` prevents credentials, enhancing privacy and security.
allow_credentials = false

# Allows or blocks requests from private networks in CORS.
# `true` permits requests from private networks.
# `false` disallows such requests, providing additional security.
allow_private_network = false

# JWT (JSON Web Token) configuration for HTTP.
[http.jwt]
# Specifies the algorithm used for signing JWTs.
# For example, "HS256" indicates HMAC with SHA-256.
algorithm = "HS256"

# The issuer of the JWT, typically a URL or an identifier of the issuing entity.
issuer = "iggy.apache.org"

# Intended audience for the JWT, usually the recipient or system intended to process the token.
audience = "iggy.apache.org"

# Lists valid issuers for JWT validation to ensure tokens are from trusted sources.
valid_issuers = ["iggy.apache.org"]

# Lists valid audiences for JWT validation to confirm tokens are for the intended recipient.
valid_audiences = ["iggy.apache.org"]

# Expiry time for access tokens.
access_token_expiry = "1 h"

# Tolerance for timing discrepancies during token validation.
clock_skew = "5 s"

# Time before which the token should not be considered valid.
not_before = "0 s"

# Secret key for encoding JWTs.
# If only one secret is set, it supplies both keys. With both empty, use the
# cluster PSK when enabled, otherwise a random secret per start. Explicit JWT
# secrets take precedence over the PSK. Identical keys on every node make bearers
# valid cluster-wide and activate follower-to-primary HTTP forwarding. Without
# configured JWT secrets or a cluster PSK, tokens are node-local and forwarding stays disabled.
# HTTP message sends, polls and consumer offset calls that reach a node that is
# not the partition primary then answer a transient 503 (code 58). Partition
# primaries are spread over the nodes, which makes that the common case.
encoding_secret = ""

# Secret key for decoding JWTs.
# When empty, the same fallback rules as encoding_secret apply.
decoding_secret = ""

# Indicates if the secret key is base64 encoded.
# `true` means the secret is base64 encoded.
# `false` means the secret is in plain text.
use_base64_secret = false

# Trusted issuers for A2A (Application-to-Application) authentication. Opt-in:
# with none configured the listener accepts only self-issued HMAC tokens.
# `issuer`, `audience`, `jwks_url` and `username` are required per entry. Every
# token from an issuer acts as the iggy user named `username`, looked up on each
# request. A token is refused while that user is missing, inactive or root.
#
# Operational note: enabling an issuer opens an outbound JWKS fetch that is
# reachable before a token's signature is verified - a token naming this issuer
# with an unknown key id can trigger a fetch to `jwks_url`. The target is fixed
# (not attacker-chosen); concurrent misses coalesce onto one fetch and repeats
# are rate-limited to at most one outbound request per issuer per short window,
# so an unknown-key-id flood cannot amplify. The same window bounds how quickly a
# freshly rotated signing key is picked up.
# [[http.jwt.trusted_issuers]]
# issuer = "test-issuer"
# jwks_url = "http://127.0.0.1:8081/.well-known/jwks.json"
# audience = "iggy.apache.org"
# username = "a2a-service"

# Metrics configuration for HTTP.
[http.metrics]
# Enable or disable the metrics endpoint.
# `true` makes metrics available at the specified endpoint.
# `false` disables metrics collection.
enabled = true

# Specifies the endpoint for accessing metrics, e.g., "/metrics".
# This route requires authentication like every other read: scrapers must
# present a bearer credential (JWT or personal access token). Any
# authenticated user gets the aggregate gauges; the per-topic series are
# exported only to users with the read_servers or manage_servers permission.
endpoint = "/metrics"

# TLS (Transport Layer Security) configuration for HTTP.
[http.tls]
# Controls the use of TLS for encrypted HTTP connections.
# `true` enables TLS, enhancing security.
# `false` disables TLS, which may be appropriate in secure internal networks.
enabled = false

# Path to the TLS certificate file.
cert_file = "core/certs/iggy_cert.pem"

# Path to the TLS key file.
key_file = "core/certs/iggy_key.pem"

# TCP server configuration.
[tcp]
# Determines if the TCP server is active.
# `true` enables the TCP server for handling TCP connections.
# `false` disables it, preventing any TCP communication.
enabled = true

# Defines the network address and port for the TCP server.
# For example, "127.0.0.1:8090" listens on localhost only on port 8090.
address = "127.0.0.1:8090"

# TLS configuration for the TCP server.
[tcp.tls]
# Enables or disables TLS for TCP connections.
# `true` secures TCP connections with TLS.
# `false` leaves TCP connections unencrypted.
enabled = false

# Certificate source for the TCP TLS listener.
# `true` generates an ephemeral loopback certificate, but only while cert_file
# does not exist on disk: an existing PEM pair is loaded instead (the server
# logs which way it went).
# `false` loads cert_file / key_file, which must both exist.
self_signed = true

# Path to the TLS certificate file. Loaded when the file exists or
# self_signed = false.
cert_file = "core/certs/iggy_cert.pem"

# Path to the TLS key file. Read together with cert_file.
key_file = "core/certs/iggy_key.pem"

# QUIC protocol configuration.
[quic]
# Controls whether the QUIC server is enabled.
# `true` enables QUIC for fast, secure connections.
# `false` disables QUIC, possibly for compatibility or simplicity.
enabled = true

# Network address and port for the QUIC server.
# For example, "127.0.0.1:8080" binds to localhost on port 8080.
address = "127.0.0.1:8080"

# How many bidirectional streams a client may keep open at once on a single
# QUIC connection. The SDK opens a fresh stream per command, so this caps the
# commands one connection has in flight. The server serves the streams of a
# connection at once and gives each reply to its stream by request id. 256
# matches `message_bus.client_queue_capacity`, the most requests the server
# runs at once for one connection. 1 makes the commands of a connection wait
# for each other.
max_concurrent_bidi_streams = 256

# Initial path MTU for QUIC connections, before MTU discovery has run.
# 1200 bytes is the QUIC minimum and quinn's own default: safe on every
# path, and MTU discovery probes upward from it automatically. Values
# above the real path MTU cause packet loss until black-hole detection
# resets the connection back to 1200.
initial_mtu = "1200 B"

# Server-side flow-control budget for unacknowledged data the server may have
# in flight on one connection. A ceiling, not a reservation, and rarely the
# operative limit: the receiver's own window binds first, and the Rust SDK's
# QUIC client sets both of its windows to about 100 KB.
send_window = "64 MiB"

# Server-side flow-control budget for data the server will buffer from one
# connection, shared by all of its streams. Symmetric with `send_window`.
receive_window = "64 MiB"

# Per-stream slice of `receive_window`. A value below `receive_window` keeps
# one unread stream from pinning the whole connection window. It is equal,
# because the server reads each stream as soon as the stream opens. Must not
# exceed `receive_window`; equality is allowed.
stream_receive_window = "64 MiB"

# Interval for sending QUIC keep-alive PINGs. One third of
# `max_idle_timeout` so up to two consecutive losses fit before the
# idle timer closes the connection. Set to "0 s" to disable.
keep_alive_interval = "10 s"

# Maximum idle time before a QUIC connection is closed. Set to
# "0 s" to disable (not recommended).
max_idle_timeout = "30 s"

# QUIC certificate configuration.
[quic.certificate]
# Certificate source for the QUIC listener.
# `true` always generates an ephemeral loopback certificate and ignores
# cert_file / key_file even when those files exist on disk; the server logs a
# warning naming the files it skipped.
# `false` loads cert_file / key_file, which must both exist.
self_signed = true

# Path to the QUIC TLS certificate file. Required when self_signed = false,
# left empty here so the shipped self-signed default has nothing to skip.
cert_file = ""

# Path to the QUIC TLS key file. Required when self_signed = false.
key_file = ""

# Personal access token configuration.
[personal_access_token]
# Sets the maximum number of active tokens allowed per user.
max_tokens_per_user = 100

# Personal access token cleaner configuration.
[personal_access_token.cleaner]
# Enables or disables the token cleaner process.
# `true` activates periodic token cleaning.
# `false` disables it, tokens remain active until manually revoked or expired.
enabled = true

# Interval for running the token cleaner.
interval = "1 m"

# Heartbeat configuration
[heartbeat]
# Enables or disables client heartbeat checks. When enabled, a connection
# that sends nothing (no request, no PING) for 1.2 x interval stops renewing
# its session, and the verifier evicts it if it holds a group membership.
# When disabled, an open connection keeps its session alive however long it
# stays silent.
enabled = true
# Interval for expected client heartbeats. 1.2 x interval is the session
# timeout: the metadata primary ends a session that no server reported for
# that long, whether or not heartbeat checks are enabled. That covers a closed
# connection and a lost node. With checks on, it also covers a silent
# connection, which loses its session after about 2.4 x interval. With checks
# off, a client host that dies without closing its socket keeps its session:
# TCP and WebSocket set no keepalive, and only QUIC closes such a connection,
# after quic.max_idle_timeout. An idle HTTP session expires after about
# 2.4 x interval either way.
# The consumer groups of an ended session rebalance, and its client must log
# in again. Each new primary grants a fresh timeout. Incomplete client lists
# defer expiry across the cluster until a full timeout has passed without an
# incomplete report. 1.2 x interval must exceed cluster.heartbeat_timeout when
# clustering is enabled, and three consumer_group.heartbeat_interval periods
# plus two gather (3s) and send (100ms) deadlines, allowing one missed report.
# So interval must exceed (3 x consumer_group.heartbeat_interval + 6.2s) / 1.2:
# about 17.67s at the default 5s, and always more than 5.16s.
# The SDKs ping automatically every 5 s, but only from a connected high-level
# client: the Rust and Java pingers start in connect(), so a session that logs
# in without it never pings. Use the same settings on all nodes.
interval = "30 s"

# OpenTelemetry configuration
[telemetry]
# Enables or disables telemetry.
enabled = false
# Service name for telemetry.
service_name = "iggy"

# OpenTelemetry logs configuration
[telemetry.logs]
# Transport for sending logs. Options: "grpc", "http".
transport = "grpc"
# Endpoint for sending logs.
endpoint = "http://localhost:7281/v1/logs"

# OpenTelemetry traces configuration
[telemetry.traces]
# Transport for sending traces. Options: "grpc", "http".
transport = "grpc"
# Endpoint for sending traces.
endpoint = "http://localhost:7281/v1/traces"

# System configuration.
[runtime]
# Path for storing runtime data.
# Specifies the directory where any runtime data is stored, relative to `path`.
path = "runtime"

# Logging configuration.
[logging]
# Path for storing log files.
path = "logs"

# Log filtering directive using the same syntax as the RUST_LOG environment variable.
# Supports simple levels ("trace", "debug", "info", "warn", "error", "off" or "none")
# as well as complex directives like "warn,server=debug,iggy=trace".
# A bare word must be a level: write "target=level" to filter one target.
# An invalid value fails the boot.
# Note: RUST_LOG environment variable always takes precedence over this setting.
level = "info"

# Whether to write logs to file. When false, logs are only written to stdout.
# When enabled, logs are stored in {path}/{logging.path} (default: local_data/logs).
file_enabled = true

# Maximum size of a single log file before rotation occurs. When a log
# file reaches this size,  it will be rotated   (closed and a new file
# created). This setting works together with max_total_size to control
# log storage.  You can set it to 0 to enable unlimited size of single
# log,  but all logs will be written to a single file,  thus disabling
# log rotation. Please configure 0 with caution, esp. RUST_LOG > debug
max_file_size = "500 MB"

# Maximum total size of all log files.  When this size is reached,
# the oldest log files will be deleted first. Set it to 0 to allow
# an unlimited number of archived logs. This does not disable
# retention or per-log-file size limits.
max_total_size = "4 GB"

# Time interval for checking log rotation status. Must be at least 1 s.
rotation_check_interval = "1 h"

# Time to keep a rotated log file after its last write. Must be at least
# 1 s, or 0 to turn off deletion by age (max_total_size still deletes the
# oldest files). The log file in use is never deleted, so a line can stay
# on disk for up to the time to fill one file plus the retention.
retention = "7 days"

# Interval for printing process and host usage (CPU, memory, disk, clients,
# messages, open file descriptors) to the log from shard 0. "0 s" disables the
# line. Any other value must be at least 1 s. CPU usage covers the latest
# sampler interval (1 s), independently of this print interval.
sysinfo_print_interval = "10 s"

# Encryption configuration
[encryption]
# Encrypt message payloads and user headers. Metadata and structural headers remain unencrypted.
# `true` enables encryption for stored payloads and user headers using AES-256-GCM-SIV.
# `false` means data is stored without encryption.
enabled = false

# The server encryption key (string), 32 bytes as standard base64.
# Every encrypted stream has its own data key, stored wrapped under a key derived from this one.
# Required when encryption is enabled. With encryption disabled a key may still be set:
# streams created with their own key are then encrypted, keyless streams stay plaintext.
# A stream created without encryption stays plaintext for life.
key = ""

# Earlier server keys (list of strings) a key rotation still needs, at most two.
# A node unwraps stream keys with them and wraps every new stream key under them too.
# Rotation runs in two phases:
# 1. Set `key` to the new key and `previous_keys` to the old one on every node. The metadata
#    primary adds a wrap under the new key to every encrypted stream and keeps the old wraps,
#    so nodes still on the old key keep serving and booting, new streams included.
# 2. Once every node runs the phase 1 config and every encrypted stream reports the new
#    key's fingerprint in `encryption_kek_fingerprint`, empty `previous_keys` and put the
#    old key's fingerprint in `retired_kek_fingerprints`. The primary drops the wraps under it.
# 3. Once every stream has dropped the old wrap, clear `retired_kek_fingerprints` on every node.
# A stream holds at most three wraps. Retire an old fingerprint before adding a fourth key.
# Messages are never re-encrypted. Losing a key that still wraps a stream makes it unreadable.
# As an environment variable: IGGY_ENCRYPTION_PREVIOUS_KEYS='["<old base64 key>"]', a single key may also be given bare.
previous_keys = []

# Fingerprints of retired server keys (list of strings), 16 lowercase hex characters each, as
# `encryption_kek_fingerprint` reports them. The metadata primary drops stream key wraps under
# these keys and never drops a wrap under a key that is not listed, even one this node lacks.
# Needs `key`, and may not name `key` or a key in `previous_keys`. Not secret.
# As an environment variable: IGGY_ENCRYPTION_RETIRED_KEK_FINGERPRINTS='["<fingerprint>"]'.
retired_kek_fingerprints = []

# Memory pool configuration
[memory_pool]
# Enables or disables the memory pool (boolean).
# `true` enables the memory pool.
# `false` disables the memory pool.
enabled = true

# Size of the memory pool (string).
# Example: "512 MiB" or "1 GiB".
# Buffers are allocated on demand; allocations beyond this budget use memory outside the pool.
# Note: This number has to be multiplication of 4096 (default linux page size).
# Minimum size is 512 MiB due to internal implementation details.
size = "4 GiB"

# Maximum number of buffers in each bucket (u32).
# There are 28 buckets in the memory pool. Each bucket can hold up to this number of buffers
# and holds different buffer sizes, from 4 KiB to 512 MiB.
# Note: This number has to be a power of 2. Minimum value is 128 due to internal implementation details.
bucket_capacity = 8192

# Cluster configuration
[cluster]
# Enables or disables cluster mode (boolean).
# When enabled, this node will participate in the cluster and coordinate with other nodes.
enabled = false

# Unique cluster name (string).
# All nodes in the same cluster must share the same name.
# This prevents accidental cross-cluster communication.
# Permanent on-disk identity: the name is hashed into the cluster id stamped
# into every metadata and partition superblock on first boot. Changing it later
# makes the server refuse to start against existing data, since the recovered id
# no longer matches the configured one. Renaming means starting from an empty
# data directory.
name = "iggy-cluster"

# Consensus runs on a fixed 10ms tick, so every duration below is converted to
# whole ticks: values are rounded down to a multiple of 10ms, and anything under
# 10ms is raised to a single tick rather than firing sooner.

# Backup-side liveness window for a consensus plane's primary (duration).
# A replica that sees no primary traffic for this long starts a view change.
# Raise it on oversubscribed hosts where scheduling stalls fake primary
# death. Must be at least "2s" and at least 4x commit_broadcast_interval: the
# primary signals liveness through its commit broadcast, and the window must
# span several broadcasts so one delayed broadcast never trips an election.
# On Linux it is also the TCP_USER_TIMEOUT of every replica link: sent data
# or keepalive probes that stay unacknowledged this long close the link.
heartbeat_timeout = "5s"

# How often the primary broadcasts its commit point to every backup (duration).
# This is the cluster's liveness signal: each broadcast resets every backup's
# heartbeat_timeout window and carries the latest commit point forward. Must be
# nonzero and, with heartbeat_timeout, satisfy heartbeat_timeout >= 4x this
# value. Drives the consensus CommitMessage timer.
commit_broadcast_interval = "500ms"

# How often the primary retransmits prepares that backups have not yet acked
# (duration). Lower values recover faster from a dropped prepare at the cost of
# more replica traffic; must be nonzero. Drives the consensus Prepare timer.
prepare_retransmit_interval = "250ms"

# How often a replica retransmits its StartViewChange / DoViewChange while a
# view change is in progress (duration). Lower values converge a healthy
# election faster at the cost of more replica traffic; must be nonzero. Drives
# both consensus view-change retransmit timers.
view_change_retransmit_interval = "500ms"

# Backstop for a stalled view change (duration): one that does not conclude
# within this window escalates to a fresh cluster-wide election. Must be nonzero
# and at least 4x view_change_retransmit_interval, so a few dropped view-change
# messages retransmit rather than prematurely escalate.
view_change_status_timeout = "5s"

# How often a recovering or view-change backup re-requests the current view's
# StartView from its primary (duration); must be nonzero. Drives the consensus
# RequestStartView timer.
request_start_view_retransmit_interval = "1s"

# How many consecutive unanswered RequestStartView probes a recovering replica
# tolerates before falling back to an election (integer). A full-cluster restart
# leaves nobody settled to answer, so the replica elects on its recovered log.
# Must be between 1 and 100.
view_probe_attempts_max = 5

# How long a stalled journal-repair stream waits before re-requesting its
# remaining window from the serving peer (duration). Repair frames are
# fire-and-forget over the lossy bus, so a session with no retry wedges forever
# on a single dropped frame. Paces both the metadata and partition repair loops;
# must be nonzero. Paces streams that are already OPEN only: how long a hole
# waits before one is opened for it is repair_gap_debounce_interval below.
# Also paces the RequestStartView probe a partition backup sends while its
# entries from before a newer view wait for a header to prove them against;
# those probes have no attempt cap.
repair_retry_interval = "1s"

# How long a backup must hold committed ops it cannot walk to before the shard's
# tick opens a repair session for it (duration). The level-triggered floor under
# every edge-triggered arming site, which a produce stream can starve; must be
# nonzero. Paces the partition sweep and the metadata detector alike.
#
# Floored at 50 consensus ticks (500ms at the 10ms tick), so values under that
# arm no sooner: one tick of lag is ordinary pipelining, and repair against it
# would fire on healthy traffic.
#
# Recovery latency for one hole is max(this, 500ms) plus up to one tick of sweep
# granularity. Under a correlated fault the partition sweep opens at most 3
# sessions per tick and holds at most 8 at once, so the Nth group waiting on
# this shard adds ceil(N / 3) ticks on top, and more while sessions are already
# in flight. That cap is what keeps a node-wide rejoin from putting every
# group's repair stream on one serving peer at once. There is one metadata group
# per node, so its detector is not rate-capped.
repair_gap_debounce_interval = "1s"

# Prepares a peer serves per repair round before the requester asks for the next
# chunk (integer). Each frame rides the per-peer message-bus queue, so this must
# stay strictly below message_bus.peer_queue_capacity or a full round overruns
# the queue and drops frames. Must be > 0 and <= 1024.
repair_chunk_max = 128

# How long a superblock may stay unwritable before the replica fail-stops
# (duration). Applies to the metadata superblock and to each partition's own. A
# group that cannot persist its view is already fenced quorum-invisible and
# retries with capped backoff; past this window the process exits with a distinct
# status so a supervisor restarts or replaces it instead of an operator finding
# the wedge in logs. It is also the deadline of each running partition file job
# (see [sharding] partition_io_capacity); expiry fences the owner and stops the
# node. "0" disables the fail-stop and leaves the group fenced indefinitely, and
# it also disables the file-job deadline. Nonzero values must be at least 30s so
# a transient disk hiccup cannot kill the process.
superblock_wedged_fatal_timeout = "2m"

# Superblock compatibility: version 2 atomically records adopted view/head/header
# identity separately from WAL body certification. Legacy version 1 records with
# 66/74-byte payloads remain readable. After a version 2 write, an older binary
# refuses boot; rollback needs a consistent pre-upgrade data backup or a deliberate
# clean rejoin. Do not remove individual superblock slots to force a downgrade.

# Replica-to-replica authentication (PSK + BLAKE3 keyed-MAC handshake).
[cluster.auth]
# When true, every replica peer must complete the authenticated handshake or be
# rejected, and shared_secret becomes mandatory. Off by default = legacy
# unauthenticated replica traffic. Enabling it is a coordinated-restart change.
# With http enabled and no http.jwt secrets configured, the PSK also becomes
# the JWT key source, making bearers valid cluster-wide and activating
# follower-to-primary HTTP forwarding.
enabled = false

# Cluster-wide pre-shared key, >= 32 bytes of CSPRNG output, byte-identical on
# every node. Prefer the IGGY_CLUSTER_AUTH_SHARED_SECRET env var (masked in
# logs, never persisted) over storing it on disk. Ignored when enabled = false.
shared_secret = ""

# Retiring pre-shared key, accepted for verification only during a rolling key
# rotation (this node keeps signing with shared_secret). Rotate in three rolls:
# 1) shared_secret = old + previous_shared_secret = new on every node,
# 2) shared_secret = new + previous_shared_secret = old on every node,
# 3) shared_secret = new alone. Leave empty outside a rotation. Same length
# floor and env-var preference as shared_secret
# (IGGY_CLUSTER_AUTH_PREVIOUS_SHARED_SECRET).
previous_shared_secret = ""

# Replica-to-replica TLS for the consensus (tcp_replica) port.
[cluster.tls]
# When true every replica connection is wrapped in TLS 1.3 (ALPN
# "iggy-replica") before the replica handshake runs. Requires
# cluster.auth.enabled: TLS carries no client certificates, so it
# authenticates the acceptor only; the PSK handshake authenticates the
# peer, TLS supplies confidentiality. Off by default = plaintext replica
# traffic. Enabling it is a coordinated-restart change: a TLS dialer
# cannot talk to a plaintext acceptor or vice versa.
enabled = false

# When true the node auto-generates a self-signed certificate at boot and
# the dialer accepts ANY peer certificate. When false (default),
# cert_file / key_file / ca_file are all required.
self_signed = false

# PEM certificate chain presented by this node's acceptor side.
cert_file = ""

# PEM private key matching cert_file.
key_file = ""

# PEM trust anchor(s) the dialer verifies peer certificates against.
# Unused when self_signed = true.
# The dialer verifies each peer against the 'ip' string from that peer's
# cluster.nodes entry, and that string is the TLS server name as well as a
# literal IP, so every peer certificate needs a matching IP SAN. A
# certificate carrying only DNS SANs fails verification.
ca_file = ""

# Shard-0 coordinator placement.
[cluster.coordinator]
# Keep replica links off shard 0 while the shard range of link 0 has another
# shard. Shard 0 already hosts the coordinator, the metadata writer, and both
# listeners; replica links are long-lived steady flows, so they are offloaded
# to peer shards by default.
skip_shard_zero_for_replicas = true

# TCP links to each peer replica, at most the shard count. Link j carries the
# frames of the shards in range j, so more links spread replication over more
# shards. Every node must run the same value: the replica handshake refuses a
# peer that differs. Shard counts may differ between nodes. A range with fewer
# shards than there are peers puts links to two peers on one shard. With
# skip_shard_zero_for_replicas on, range 0 keeps its links off shard 0, so it
# needs one shard more than there are peers.
replica_connections_per_peer = 1

# When the server runs more than one shard, exclude shard 0 from client
# placement. Off by default: client connections are short-lived and benefit
# from shard-0 parallelism more than replicas do.
skip_shard_zero_for_clients = false

# Full roster of cluster members. Byte-identical on every node. The running
# node's identity is resolved at launch from the '--replica-id <N>' CLI
# flag, which selects the entry in this list that describes the current
# node. All other entries are remote peers.
#
# 'ip' is the node's roster address. Replica-to-replica traffic and
# follower-to-primary HTTP forwarding use it. It is not the bind interface for
# tcp/quic/http/websocket, which comes from each transport's own 'address'
# setting above; the roster supplies those transports their port only. A
# cluster spread across hosts therefore needs each transport's 'address' set to
# '0.0.0.0' or the routable NIC; the defaults below listen on loopback only,
# and a bind that cannot serve the advertised 'ip' is warned about at startup.
#
# Each node may also set 'advertised_address': the client-facing address
# handed out in cluster metadata and leader redirects. Set it when 'ip' is
# a private replica-network address unreachable by clients (Docker,
# Kubernetes, NAT). Accepts a literal IPv4/IPv6 address or a DNS hostname
# (RFC 1123: ASCII letters, digits, '-' and '.'; no port, no trailing dot).
# When unset, clients receive 'ip'.
#
# When different client networks need different addresses (a public
# 'advertised_address' would route in-VPC clients out through the public
# side), add per-network 'advertised_addresses' selectors: clients whose
# peer IP falls inside 'client_cidr' are handed 'address' instead of the
# catch-all. 'address' takes the same forms as 'advertised_address'
# (literal IP or RFC 1123 hostname, never a port - ports always come from
# 'ports'). At most 16 selectors per node; boot also rejects duplicate
# 'client_cidr' entries on one node (compared truncated, so '10.0.1.0/16'
# duplicates '10.0.0.0/16') and any two nodes advertising one host:port
# to overlapping client sets - reusing a host:port across nodes is legal
# only when no client would resolve both nodes to it.
#
# The longest matching prefix wins; clients matching no selector fall
# back to 'advertised_address', then 'ip'. Matching is per address
# family: '0.0.0.0/0' matches no IPv6 client and '::/0' matches no IPv4
# client, so covering both families takes one selector per family (or the
# catch-all). IPv4-mapped IPv6 CIDRs ('::ffff:10.0.0.0/104') match like
# their IPv4 form only at prefix length 96 or longer; shorter ones match
# native IPv6 clients only. Matching sees the transport-level peer
# address, so clients behind a proxy or load balancer match the proxy's
# network, not their own.
#
# Every 'address' must be routable from inside its own 'client_cidr':
# leader-aware SDK clients redial whatever address metadata advertises,
# so a selector pointing at a host its own clients cannot reach strands
# them mid-redirect. Prefer literal IPs over hostnames - the SDKs differ
# in how they compare an advertised hostname against the address they
# dialed, and a mismatch costs a reconnect on every fresh connect.
#
# Note for rolling upgrades: older server binaries reject a TOML config
# containing 'advertised_addresses' but silently ignore the equivalent
# 'IGGY_CLUSTER_NODES_*_ADVERTISED_ADDRESSES_*' env vars; either way,
# upgrade every binary first, then add selectors. Mid-upgrade, an env-var
# roster would serve selector addresses from upgraded nodes and the
# catch-all from the rest.
#
#   [[cluster.nodes]]
#   name = "iggy-node-1"
#   ip = "10.0.1.5"                        # replica plane, literal IP only
#   advertised_address = "203.0.113.10"    # catch-all for unmatched clients
#   replica_id = 0
#   ports = { tcp = 8090, http = 3000, tcp_replica = 9090 }
#
#   [[cluster.nodes.advertised_addresses]]
#   client_cidr = "10.0.0.0/16"            # in-VPC clients stay private
#   address = "10.0.1.5"
#
# In cluster mode, 'ports' is the single source of listener ports: every
# enabled transport needs an explicit per-node port, otherwise the server
# refuses to start.
[[cluster.nodes]]
name = "iggy-node-1"
ip = "127.0.0.1"
replica_id = 0
ports = { tcp = 8090, quic = 8080, http = 3000, websocket = 8092, tcp_replica = 9090 }

[[cluster.nodes]]
name = "iggy-node-2"
ip = "127.0.0.1"
replica_id = 1
ports = { tcp = 8091, quic = 8081, http = 3001, websocket = 8093, tcp_replica = 9091 }

# Example additional node (commented out). tcp skips 8092-8094: those are the
# websocket ports of the three nodes, which collide once nodes share a host.
# [[cluster.nodes]]
# name = "iggy-node-3"
# ip = "192.168.1.100"
# advertised_address = "iggy-node-3.example.com"
# replica_id = 2
# ports = { tcp = 8095, quic = 8082, http = 3002, websocket = 8094, tcp_replica = 9092 }

# Sharding configuration
[sharding]
# CPU allocation - controls the number of shards and their CPU affinity.
# Possible values:
# - "all": Use all available CPU cores
# - numeric value (e.g. 4): Use 4 shards on the first 4 CPUs in the allowed set
# - range (e.g. "5..8"): Use 3 shards with affinity to cores 5, 6, 7
# - numa settings:
#     + "numa:auto": Use all available NUMA nodes and cores (default)
#     + "numa:nodes=0,1;cores=4;no_ht=true": Use NUMA node 0 and 1, each nodes use 4 cores, and no hyperthreads
cpu_allocation = "numa:auto"

# Whether shard threads are pinned to dedicated CPU cores (default: true).
# Pinned cores are drawn from the process's allowed CPU set (affinity/cpuset
# mask), so the server cooperates with systemd `AllowedCPUs=` and container
# cpusets. Set to false when the server shares cores with other workloads
# (e.g. a multi-tenant host slicing CPU via cgroup quotas): unpinned shards
# let the kernel scheduler place threads freely instead of piling every
# process onto the same low-numbered cores.
pin_cores = true

# Per-shard inter-shard inbox capacity (the main lane: consensus frames,
# connection setup, reconcile wakes). Bounded by design; consensus-frame
# drops recover via VSR retransmit. Size for the combined consensus traffic of
# all groups hosted by the shard, including replica fan-out and burst headroom.
# Per-group prepare queue depth alone does not determine this capacity.
# Slots are allocated at startup per shard, even before traffic arrives.
inbox_capacity = 65536

# Capacity of the reply lane: a separate bounded channel for cross-shard
# client-reply forwards, whose drops are terminal (no in-protocol
# retransmit - the client never receives the reply). Split from
# inbox_capacity so a consensus burst cannot evict reply forwards; size for
# peak client-reply fan-out per shard.
reply_inbox_capacity = 1024

# Maximum running disk polls plus queued completions per shard. Each disk read
# reserves a slot before I/O and retains it until the owner dequeues or discards
# the result, including after a requester timeout. When all slots are occupied,
# new disk polls are rejected before I/O. Main and reply inbox traffic uses
# separate capacity. This limits operation count, not retained message bytes.
poll_completion_capacity = 1024

# Longest wait of a deferred poll or readiness wait (at most 10 minutes). A
# longer requested wait is shortened to it.
deferred_poll_max_wait = "30 s"
# Deferred polls and readiness waits parked on one shard, and the part of
# them that one session may hold. An HTTP request without a binary session
# counts against its user. A request above either limit is refused with a
# retryable error.
deferred_poll_max_pending = 1024
deferred_poll_max_pending_per_session = 64
# A deferred disk read reserves three times the max_bytes of its poll, and at
# least three times 1 MiB, because one disk read can take a 1 MiB chunk
# whatever its max_bytes. It reserves no more than the first value. The
# deferred reads of one shard reserve no more than the second value together
# (at most 1 GiB). A read that finds no room waits for one, behind the reads
# that found no room before it. A reply carries no more than the first value,
# unless its first message alone is wider.
deferred_poll_max_read_bytes = "16 MiB"
deferred_poll_max_inflight_bytes = "64 MiB"

# Active partition file jobs plus results awaiting owner acceptance per shard (1..=256).
# Exhausting either limit queues partition file work until capacity is released.
# Running jobs use [cluster] superblock_wedged_fatal_timeout, counted in pump ticks.
# Expiry fences the owner and stops the node; 0 disables this deadline.
partition_io_capacity = 16
# Omission selects the largest legal job charge, slightly above 4 GiB per shard.
# This is an admission ceiling, not an eager allocation. A smaller budget fails boot.
# Charges include retained backing allocations, even for small visible slices.
# partition_io_bytes_max = "8 GiB"

# Wall-clock budget for a single shard's bus drain on shutdown. Drives
# the per-shard watchdog and the parallel-join survivor path; sized
# larger than typical TCP RTT times in-flight write-batch so writers
# receive their full last `write_vectored_all` budget before the
# connection registry force-tears the bus. Hosts with slow durable writes may need
# to extend this past the default.
shutdown_drain_timeout = "10 s"

# Poll cadence for the cross-thread shutdown flag and for the
# metadata-handoff loops. Trades off Ctrl-C latency against idle wakeup
# cost; the default keeps shutdown observably prompt without measurable
# scheduler overhead. Must be less than or equal to shutdown_drain_timeout.
shutdown_poll_interval = "50 ms"

# Hard wall-clock deadline for joining shard threads at process exit. A
# shard whose pump or listener wedges past this budget is abandoned with
# an error log instead of blocking exit forever. Must be at least
# shutdown_drain_timeout, or shards would be abandoned mid-drain.
shutdown_join_timeout = "30 s"

# Safety-tick cadence for the partition reconciliation loop. The reconciler
# also wakes on every metadata commit from shard 0, so this only covers
# dropped wake-ups and the initial post-bootstrap convergence window.
reconcile_periodic_interval = "1 s"

# WebSocket listener configuration. The frame-tuning knobs below are the
# live source for the server's WS / WSS plane; they are folded into a
# compio-ws WebSocketConfig once at bus construction. Each size knob is
# optional: commenting it out keeps the compio-ws (tungstenite) default
# noted next to it. A malformed size string fails config load.
[websocket]
enabled = true
address = "127.0.0.1:8092"

# Target minimum size of the frame read buffer. compio-ws default: "128 KiB".
# read_buffer_size = "128 KiB"

# Target buffer size for batched writes before flush. compio-ws
# default: "128 KiB".
# write_buffer_size = "128 KiB"

# Hard ceiling on the write buffer; writes past it error instead of
# buffering, so it must exceed write_buffer_size by at least one message.
# compio-ws default: unlimited.
# max_write_buffer_size = "128 MiB"

# Hard upper bound on a single inbound WebSocket message
# (post-fragment-reassembly). Must not exceed message_bus.max_message_size.
# compio-ws default: "64 MiB".
# max_message_size = "64 MiB"

# Hard upper bound on a single inbound WebSocket frame
# (pre-fragment-reassembly). Must not exceed max_message_size.
# compio-ws default: "16 MiB".
# max_frame_size = "16 MiB"

# Whether to accept unmasked frames from clients in violation of
# RFC 6455 client-to-server framing rules. Strict (false) by default.
accept_unmasked_frames = false

[websocket.tls]
enabled = false

# Certificate source for the WSS listener.
# `true` generates an ephemeral loopback certificate, but only while cert_file
# does not exist on disk: an existing PEM pair is loaded instead (the server
# logs which way it went).
# `false` loads cert_file / key_file, which must both exist.
self_signed = true

# Loaded when the file exists or self_signed = false.
cert_file = "core/certs/iggy_cert.pem"
key_file = "core/certs/iggy_key.pem"

# Metadata consensus plane tunables (shard 0's VSR replica: users,
# streams, topics, sessions). Size these together: a deeper prepare queue
# admits more concurrent in-flight metadata ops (e.g. login storms), and
# the journal must hold enough slots that a forced checkpoint (triggered
# when remaining slots fall to the checkpoint margin, which itself is
# max(64, prepare_queue_depth)) stays rare. Validation enforces
# journal_slots >= 4 * max(64, prepare_queue_depth).
[metadata]
# Depth of the metadata prepare queue: how many uncommitted metadata ops
# may be in flight at once. Submits beyond it are rejected with the
# transient "metadata prepare queue is full" and retried by the SDK.
# Capped at 127 by the view-change wire format: a DoViewChange describes the
# uncommitted suffix with one nack bit and one present bit per entry in a u128 each,
# so a deeper queue produces entries a view change can neither adopt nor prove dead.
prepare_queue_depth = 32

# Size of the metadata WAL's in-memory index, in slots (one committed but
# not-yet-snapshotted op per slot). Larger values buy more headroom
# between forced checkpoints at the cost of memory and bigger WAL
# rewrites per checkpoint. Reducing this for an existing data directory is
# refused at boot if the live WAL suffix collides in the smaller index;
# restore the previous value to recover.
journal_slots = 1024

# Initial capacity of the metadata session registry, shared by binary clients
# and HTTP sessions. Live and unretired sessions occupy slots. A full registry
# refuses new sessions; it never evicts retry protection. The first committed
# operation fixes the capacity, so changing this value does not resize an
# existing registry after restart or transfer. The HTTP cache cap uses half
# the configured value, but cannot raise the committed registry limit.
# Must be between 2 and 65536.
clients_table_max = 8192

# Cap on the partitions of all streams and topics. A request to create a
# topic or partitions that would exceed it fails with PartitionsLimitReached.
# The metadata primary checks it with its own value, so give every node the
# same value. The check counts the committed partitions and those of the
# creates still in flight, so creates never take the count past the cap. A
# create that will fail holds its partitions until it commits. If only the
# creates in flight leave no room, the request gets 58 (TransientNotAccepted)
# instead, and the client retries it until its deadline. 0 means no cap.
partitions_max = 0

# Records the metadata change log keeps for streams, topics, partitions,
# consumer groups, users and personal access tokens. Once the count passes
# it, the oldest records go, and a reader whose position they held must
# rebuild from current state. The log is part of the metadata snapshot, so a
# larger value costs memory and checkpoint size. Node-local: replicas may keep
# different depths. Must be between 1 and 1048576. Each of the two record
# budgets also keeps at most 128 MiB of record bodies.
change_log_resource_capacity = 65536

# Records the metadata change log keeps for sessions and consumer group
# membership. A separate budget, so a login or membership storm cannot evict
# resource history. Must be between 1 and 1048576.
change_log_activity_capacity = 16384

# Per-partition consensus plane tunables. Unlike [metadata] (one shard-0
# plane), a pipeline exists per partition, so raising this multiplies pinned
# request-buffer memory by the partition count. Keep it modest.
[partition]
# Retention is per topic, set at CreateTopic and readable on GetTopic:
#   max_topic_size   - delete oldest sealed segments past this size
#                      ("unlimited" when unset)
#   message_expiry   - delete sealed segments older than this ("none" when unset)
# Both policies can be active at once. The active segment is never touched.
# WAL-backed partitions request a checkpoint before deleting referenced segments;
# retention waits for that checkpoint, even below the usual WAL capacity trigger.
# Call GET /options/topic (or the SDK's describe_options) for the full catalog
# with this server's defaults.

# Topic durability and flush scheduling are set at creation and returned by GetTopic.
# durability controls message completion. consumer_offset_durability controls explicit offset stores and deletes.
# Both independently default to "replicated". Neither inherits the other.
# Every disk-backed partition uses a WAL for recovery and retries.
# WAL references retain segment bodies by hard link until reclamation.
# Full message payloads count against wal_bytes_max under both durability policies.
# Persistence barriers can also persist co-batched messages.
# Persisted prepares are limited to 64 MiB including the consensus header. Oversized operations are rejected permanently.
# Both policies write data to storage. "replicated" waits for VSR commit and application without an additional stable-storage barrier.
# "persisted" also requires recoverable stable-storage copies at the replication quorum before explicit success.
# A singleton quorum is one replica. Its persisted completion follows recoverable local persistence.
# Poll auto-commit remains asynchronous. A successful poll does not confirm that its submitted offset operation committed or became durable.
# HTTP ack=none returns dispatch acceptance with Iggy-Durability: none, even for persisted topics.
# messages_required_to_save defaults to 1024 and size_of_messages_required_to_save defaults to 1 MiB.
# These thresholds schedule ordinary segment writes. Required persistence, capacity pressure and lifecycle operations can flush sooner.

# Segment storage
# Segment size is per topic, set at CreateTopic as `segment_size` (1 GiB when
# unset). It is a soft limit: a segment may close one whole batch past it.
# Bounds are enforced at creation - a 512 B multiple, at least 1 MiB, and no
# larger than 1 GiB.
#
# `preallocate_segments` is per topic too: it reserves exactly `segment_size`
# up front where the filesystem supports it. Off unless a topic asks for it --
# with the default 1 GiB segment size it costs 1 GiB of real disk per
# partition at creation.

# Recovery behavior
# Recovery validates message batches against their checksums and partition identity before serving data.
# A genuinely incomplete tail can be truncated. Interior damage or valid records after a damaged range require refusal or repair, never blind truncation.
# A sparse index that contradicts the message log is rebuilt only when the discrepancy fits the storage guarantee.
# With message durability = "replicated", background writeback can preserve later pages before earlier ones, so recovery checks the log from byte zero.
# With message durability = "persisted", completed durable segment flushes constrain the incomplete tail and permit the established index-anchored recovery path.
# Durable prepares can still reside in the partition WAL rather than segments. Recovery reconciles that history with the materialized state before serving.
# Index reconstruction and validation can take time across many segments. A slow recovery is not by itself evidence of a stalled server.
# Unrecoverable local segment data is fenced and repaired from peers when available. A singleton cannot fetch a missing copy from another replica.
# Fenced files remain available for diagnosis. Recovery must not replace an acknowledged durable history with an empty healthy partition.
# Metadata and partition journals verify their own integrity and recovery frontiers independently of sparse indexes.

# Per-partition active WAL and queued/in-flight prepare budget under both
# durability policies. A 4 KiB multiple, from 128 MiB + 8 KiB to 4 GiB.
# The minimum accommodates the retained commit-point prepare and a maximum-size successor.
# Checkpointing starts at half the byte budget.
# Explicit requests or 1024 dirty files can trigger checkpointing sooner.
# File barriers run with at most 16 concurrent operations. Temporary rewrites need extra disk
# space. Lowering this budget preserves existing history and blocks new writes
# until recovery and checkpointing reclaim enough space.
# Checkpoints synchronize changed files through the partition writer. Preparing
# indexes and receipts still awaits I/O in the owning shard pump.
# The HTTP metrics endpoint exposes per-shard partition_wal_* byte gauges and
# completed batch, prepare, checkpoint and error counters.
# partition_wal_retained_bytes plus queued_bytes and in_flight_bytes measures budget usage;
# partition_wal_disk_bytes measures WAL file length, excluding referenced segment bodies.
# partition_wal_prepares_total over partition_wal_batches_total is the prepares per durable group, and
# partition_wal_group_commit_waits_total counts the groups that actually took the optional wait
# below, so a delay that never fires is distinguishable from one that fires and buys nothing.
wal_bytes_max = "256 MiB"

# Bounded wait for more prepares before a persisted partition's WAL writer
# starts its durability barrier, in microseconds. 0 disables it. Max 10000.
# Spends up to this much acknowledgment latency to cut device writes: one
# barrier and one frontier write then cover a whole group of prepares instead of
# a single one. Durability is unchanged, the same barrier runs over the same
# bytes, later, and the quorum gate is untouched.
# Skipped while prepares arrive further apart than the delay, so an idle
# partition never waits. Earns nothing until the barrier completes faster than
# prepares arrive, which is where the writer stops grouping by itself. Start
# near the measured barrier duration.
wal_group_commit_delay_micros = 0

# Verify the checksum of batches read from segment storage. A mismatch is reported rather than served.
validate_checksum = true

# Depth of a partition's prepare queue: how many uncommitted produce /
# consumer-offset ops may be in flight at once for that partition. Submits past
# it spill into a request queue of twice this depth; once both are full the
# server replies with TransientNotAccepted. A lost reply can still cause a client
# request timeout. Must be > 0 and <= 127: the ceiling is the view-change wire, not
# memory. A DoViewChange describes the uncommitted suffix with one bit per op in a
# u128 bitset, and this depth bounds that suffix.
prepare_queue_depth = 32

# Initial capacity for session-qualified retry protection in each partition.
# Live and unretired sessions occupy slots. A full table refuses new writers
# with TransientNotAccepted; it never evicts existing protection. Ended sessions
# release slots only after ordered retirement. The first committed operation
# fixes the capacity, so changing this value does not resize an existing group
# after restart or transfer. Must be > 0 and <= 65536.
#
# Unlike [metadata] clients_table_max, this budget is PER GROUP, so worst-case
# memory scales with partition count. Size it to the producers one partition
# actually sees, not the node's client total.
dedup_clients_max = 4096

# Distinct durable consumer-offset keys a partition primary admits per kind.
# Standalone consumers, consumer groups and external groups are counted
# separately, so one partition can hold up to three times this many keys.
# Existing keys remain writable at the limit. A new key is rejected before
# consensus.
# A non-empty auto_commit poll that needs a new offset key is also rejected
# with TooManyConsumerOffsets and returns no messages. A poll whose auto_commit
# cannot be submitted (the owning shard's inbox is full, or the partition
# changed primary during the read) is rejected with TransientNotAccepted, also
# without messages; both are retriable. Polls with auto_commit disabled do not
# allocate offset keys and remain available.
# UPGRADE: existing files are loaded even above this limit, but new keys then
# remain blocked until offsets are explicitly deleted or this limit is raised.
# Standalone offsets have no automatic expiry. Reuse stable consumer ids and
# count existing numeric offset files per partition and kind before upgrading.
# The environment override is IGGY_PARTITION_CONSUMER_OFFSETS_MAX.
# UPGRADE: on replicated partitions, offset stores and deletes carrying NoAck
# wait for VSR commit. First-party SDK offset methods request Quorum.
# Must be > 0 and <= 262144.
consumer_offsets_max = 4096

# Consumer-offset durability is selected per topic by consumer_offset_durability.
# It independently defaults to replicated, just like message durability.
# Poll auto-commit submits an offset write asynchronously. A poll response does
# not confirm that this write committed or became durable.

# How many offsets a partition claims in its superblock ahead of the mint
# counter before it will append, so a crash-restarted replica resumes above
# every offset it confirmed to a client instead of re-minting it for a different
# message. One durable superblock update per block: lowering it raises the
# durable-write rate on the write path, raising it wastes at most one block of the u64
# offset space per crash. Must be > 0 and <= 16777216.
#
# SINGLE-REPLICA groups only. A replicated group acks a send once a quorum has
# journaled it, so re-minting there needs a full-cluster crash; it claims
# nothing, pays no write, and ignores this value.
#
# For superblock compatibility, see superblock_wedged_fatal_timeout in [cluster].
offset_reservation_lease = 65536

# Entries the evicted ring retains per multi-replica partition for journal
# repair after a peer rejoins. Larger widens the window a restarting peer can be
# served from the ring before falling back to bulk sync, at the cost of pinned
# memory per partition. Must be > 0 and <= 65536. Single-replica partitions
# retain nothing regardless.
evicted_ring_capacity = 65536

# Payload-byte ceiling per partition and replica; the first ring cap reached
# evicts the lowest ops, retaining the newest entry even if it alone exceeds
# this budget. Must be > 0 and <= "256 MiB". Allocation capacity, alignment and
# index overhead are additional memory, especially for small offset commits.
# There is no node-wide budget. partition_repair_ring_bytes reports payload
# bytes summed across a shard's partitions, not their allocated memory or RSS.
evicted_ring_bytes_max = "64 MiB"

# Byte budget for segment payloads a SERVING shard keeps resident to answer
# state-transfer chunk requests. PER SHARD, and shard count defaults to core
# count, so the process-wide high-water is this times the core count on top of
# page cache -- keep that product in mind before raising it. The default is a
# FIXED 2176 MiB: two sealed segments at the built-in 1 GiB segment ceiling,
# each of which can close one whole message_bus.max_message_size past its
# target, which is why it is not 2 GiB. That ceiling is a compile-time
# constant: no config key moves it, and a per-topic segment_size is refused
# above it. How many groups this shard serves at once is
# floor(this / max(partition.transfer_artifact_bytes_max, 1 GiB + 64 MiB)),
# minimum one. So raising transfer_artifact_bytes_max without raising this
# lowers concurrency and can take it to one, serialising rejoins; boot warns
# when it drops below two.
# Below one segment a single rejoining node thrashes the cache by itself and
# every miss re-reads and re-hashes a whole segment to serve one 256 KiB chunk.
# Running under the budget costs re-reads, not failures.
# Must be > 0 and <= "64 GiB".
transfer_served_cache_bytes_max = "2176 MiB"

# Alloc ceiling for ONE received state-transfer artifact, per shard. The
# receiver holds it resident through verify, walk and staging write, and up to
# four transfers run at once. MUST cover the largest segment any topic may be
# created with (a fixed 1 GiB, since segment_size is a per-topic option now)
# plus message_bus.max_message_size, because a segment may close one whole batch
# past its cap: under that, a legal segment is refused, the whole manifest with
# it, and the partition livelocks re-requesting it from every peer. Boot
# validates the floor.
#
# The shipped value sits EXACTLY at that floor: 1024 MiB + the shipped 64 MiB
# max_message_size. Raising max_message_size alone therefore refuses boot --
# raise this one by the same amount in the same edit (max_message_size itself
# tops out at the frozen 256 MiB recovery ceiling; see its own note). Raising
# this above the floor for headroom also DIVIDES the serving concurrency
# derived from transfer_served_cache_bytes_max above, so raise that in step.
# Must be > 0 and <= "64 GiB".
transfer_artifact_bytes_max = "1088 MiB"

# Message bus configuration.
# Tunables for the inter-shard / inter-replica internal bus that ships
# consensus traffic between replicas and SDK-client traffic between
# shards. These knobs are consensus-liveness-critical (max_batch gates
# throughput under backpressure). Defaults match
# core::message_bus::config::MessageBusConfig::default().

[message_bus]
# Maximum number of BusMessage entries coalesced into a single writev(2)
# call. Hard upper bound: IOV_MAX/2 = 512 on Linux.
max_batch = 256

# Wire-level cap on a single framed message. Must fit a consumer session report
# (at least 280 B). Boot refuses a value above the frozen 256 MiB ceiling:
# segment recovery derives fixed scan and allocation
# limits from the widest LEGAL record, so batches admitted above the ceiling
# would be refused as implausible on a later boot. Raising it past 64 MiB
# also breaks Go clients, whose frame cap is a hard 64 MiB constant.
max_message_size = "64 MiB"

# Read-ahead buffer per plaintext replica link. The framing layer decodes every
# complete frame a fill delivered, and a fill takes what the socket holds rather
# than waiting for a full buffer. 0 selects the unbuffered path (one read per
# header, one per body), and so do unlimited and none, which the byte-size parser
# reads as 0. No-op under cluster.tls.
#
# A read at least this size that starts on an empty buffer goes straight to the
# socket. The bypass needs an empty buffer, so a body between one and two buffers
# crosses the buffer whole, and a body of two buffers or more crosses it for about
# one buffer.
#
# 32 KiB holds 128 PrepareOks or 8 average Prepares of one burst. It sits below the
# kernel's default receive buffer (tcp_rmem[1], 128 KiB), which autotuning grows
# further once the reader falls behind: a backlog then costs several reads rather
# than one. That is the trade this value sets, fewer bytes copied per Prepare
# against a lower batching factor under backlog. Boot rejects a nonzero value
# outside 4 KiB..16 MiB.
replica_read_buffer_size = "32 KiB"

# Bound on each replica peer's mpsc queue. The writer task drains; the
# send_to_* path enqueues.
peer_queue_capacity = 4096

# Each SDK connection allocates separate inbound and outbound queues.
# Keep their capacity independent of replica repair bursts.
# The capacity is also the most requests the server runs at once for one
# connection. A reply waits for room in the outbound queue, so a client that
# reads its replies keeps its connection. Requests past the cap wait in a
# queue of 1024 per connection. A request that finds that queue full gets the
# retryable error 58 (TransientNotAccepted), and if the outbound queue is full
# too, the server closes the connection. A heartbeat eviction also closes a
# connection whose outbound queue is full.
client_queue_capacity = 256

# How long a reply waits for room in a connection's outbound queue before the
# server closes that connection. The queue stays full only while the client
# leaves its socket unread, so this bounds how long such a client pins its
# queued replies and request tasks. The client then reconnects and recovers
# its session. Must be > 0.
client_write_stall_timeout = "30 s"

# Bytes of requests that wait in the per-connection queue of 1024 described
# above. A request that would take the queue past it gets the same retryable
# error 58, unless the queue is empty, so one request of any legal size always
# fits. The default holds the 256 requests one connection runs at once at
# 1 MiB each. Must be > 0.
client_request_queue_bytes_max = "256 MiB"

# Interval between outbound reconnect attempts to peers with peer_id > self_id.
# Also bounds each dial, so a peer that drops SYNs cannot stall the sweep.
reconnect_period = "1 s"

# Timeout for per-peer close drain (flush writer, tear down reader)
# before force-cancellation.
close_peer_timeout = "2 s"

# Wall-clock bound on a single stream.shutdown() / ws.close() in the
# safe-shutdown sequence of the TLS-family transports.
close_grace = "2 s"

# Wall-clock bound on a single connection's handshake phase. Threaded
# into compio::time::timeout(handshake_grace, ...) at each accept site
# (TCP-TLS rustls accept, WS HTTP-Upgrade, WSS combined TLS+WS, QUIC
# connecting.await + accept_bi.await) so a slowloris peer cannot pin
# per-conn channels + registry slot + spawned task indefinitely.
# A replica link gets one such window for the placement preamble, TLS and
# the replica handshake together. The window also bounds how long the links
# to a peer may stay incomplete before they close and redial, so keep it
# above reconnect_period: below it, the links to a peer form only when all
# of them connect in one sweep.
handshake_grace = "10 s"

# Cap on open client sockets of the node: TCP, TCP-TLS, WebSocket, WSS, HTTP
# and HTTPS together. Shard 0 closes a connection past the cap at accept, so
# clients cannot take the file descriptors that storage writes need. QUIC does
# not count, because its connections share one UDP socket. When unset, the cap
# is half the soft RLIMIT_NOFILE that the server has after it raises the limit
# at boot. 0 means no cap.
#
# The server always raises the soft RLIMIT_NOFILE to the hard limit at boot
# (on macOS, to at most 10240), and no setting turns this off. To keep a lower
# limit, lower the hard limit, for example with LimitNOFILE in a systemd unit
# or with ulimit -Hn.
#connections_max = 10000

# This node's own client-facing identity, used when 'cluster.enabled' is false.
[node]
# A literal IP or a DNS hostname, without a port. Named to match its roster
# counterpart 'cluster.nodes.advertised_address', which answers the same
# question per node. The unspecified address ("0.0.0.0", "::") is rejected: it
# is the bind address's answer to a question clients are not asking. Commented
# out here because the shipped 'tcp.address' binds a concrete address and needs
# no declaration.
#advertised_address = "broker-1.example.com"